Theory of Design:
Noise generated by the length of the speaker cable or from the amplifier is the main cause of the sound quality distortion.
By applying the “negative pole pulling force theory”, we invented “Harmonizer Pro” to tackle the problem. The high end premium grade capacitors are used to provide ultimate natural sound quality and will totally release the potential of your speakers to reach it’s extreme performance.
Other than its application in speakers, Harmonizer Pro can be used in Pre-amplifier if paired with “GND Box Absolute” or “Xaga” to achieve better sound control of all channels to your power amplifier.
Four frequency buttons are designed to facilitate fine-tuning the soundstage of their system. Under the non-polar single pole working environment , potential risk could be handled.
Method of Usage:
1) Turn off the device to be connected
2) Harmonizer Pro can be used in following devices:
A) Source e.g. CDP, DAC, BDP
Connect the “IN” of the Harmonizer to the “Coxial/RCA IN” in the device with “RCA GND cable”
B) Pre amplifier
Connect the “IN” of the Harmonizer to the “Coxial/RCA IN” in the device with “RCA GND cable”
C) Power amplifier
For speaker & power amplifier connection,
connect the “IN” of the Harmonizer to the negative pole of the speaker terminal in the power amplifier with “Speaker GND loading Jumper”
3) Connect the “OUT” of the Harmonizer to the GND Box Absolute/Xaga by using 3 inch jumper provided
4) Only use 1 Harmonizer for 1 Device and connect to 1 Absolute GND Box or Xaga
5) Turn on the device
6) 4 buttons available to tune up the frequency of the device/ speaker:
HF : High Frequency
HM : High to Middle
MB : Middle to Base
LB : Lower Base